|
Rotary Cutting Unit
Gauge Roll Units with Web Table
Rolls are of 300mm dia. made from chilled cast iron with hardness between 50 to 60 HRC and ground to mirror finish. The bottom roll is lifted/lowered for accurate gap setting using imported Jactuators. Each Gauge Roll is provided with a web table adjustable in height. Feed conveyor with a separate drive is provided to feed the dough received form the lamina tor in to the first gauge roll unit.
Relaxation Conveyor
Receives the dough sheet from the web Table of the final Gauge Roll Unit. The sheet is relaxed by forming 'waves' and is passed on to the next conveyor.
Rotary Cutting Web with Rotary Cutter (excluded)
Provided with a 10" dia. food grade quality rubber roller. The rubber roller has a lifting / lowering arrangement. An endless web is fitted to carry biscuits to the next conveyor.
Scrap Conveyors
The system consists of scrap pick up conveyor, scrap cross conveyor, scrap return conveyor and oscillation conveyor to distribute the dough evenly into the hopper of laminator or Pre-Sheeter.
Panner
Transfers Rotary cut or Rotary moulded biscuits to the feed end of the biscuit oven
Features
-
Machines available in widths of 32" (800 mm), 39" (1000 mm) & 48" (1200 mm)
-
Top & bottom Gauge Rolls of 300 mm dia. Bottom Gauge Roll lifted / lowered through imported Jactuators, keeping the top Gauge Roll in a fixed position. Final gauge roll of 400 mm. (Optional)
-
Side plates for Gauge Rolls are of 40 mm thick mild steel plates
-
Side plates for all other Conveyors are of 20 mm thick mild steel plates
-
Mechanical tensioning and pneumatic tracking arrangements provided for all canvases
-
All Conveyors & Gauge Roll Units driven by in-line helical geared motors fitted with Frequency Controllers for speed variation
-
Drive synchronisation through a PLC system using Display Units
-
Electronic gap sensing for Gauge Roll Unit
-
Pneumatic tensioning and tracking arrangements
Options
- Outer covers in mild steel (painted) or stainless steel
- Drive synchronization through a PLC system using Display Units
- Electronic gap sensing for gauge roll unit
- Pneumatic tensioning and tracking arrangements
- Milk spray arrangement
- Pre-Sheeter behind the first gauge roll unit.
Specification
Plant width
inches (mm)
|
A
|
B
|
Outside wide
inches (mm)
|
Canvas width
inches (mm)
|
32" (800)
|
50" )1280
|
36" (914)
|
39" (1000)
|
58" (1480)
|
45" (1144)
|
48" (1200)
|
66" (1680)
|
54" (1370)
|
|
Send Mail